Skip to main content
UPTIME

Commercial Garage Door Installation & Replacement in Mobile, AL

For commercial garage door installation or replacement in Mobile, AL, call (385) 325-7138 to describe the opening, the door you have or need, and why it's being replaced. The company that takes the job measures, specifies, prices and schedules the work.

Call(385) 325-7138

Call to describe the problem—if the door is stuck open or the dock is down, say so first.

Independent service-request website. Calls may be shared with an independent commercial dock-and-door repair company. That provider confirms availability, scope, pricing, and service terms.

Facts checked: September 23, 2026 — City and County codes, wind amendments and Alabama licensing.

For commercial buildings: warehouses, docks, plants, fleet garages, shops and self-storage.

Repair, replace, or build a new opening?

Repairing a door fixes the parts that failed. Replacing a door swaps in a new door in the same opening. Building a new or bigger opening is structural work that goes beyond the door. Each job raises different questions, and the last one needs more than a door company.

Your situationWhat it usually involvesLocal questionWhere it's covered
Door failed, but it's in good shape overallRepairUsually noneOverhead door repair or roll-up door repair
Door is worn out or badly damaged, same openingReplacement doorPermit and wind rating at this addressThis page
Storm or impact destroyed the doorReplacement doorWind rating and permitThis page
Adding an opener to a manual doorNew operator and wiringElectrical work and permitThis page and operators
New or bigger opening in the wallStructural work plus a doorBuilding permit and designStructural work is outside this request
Fire-rated openingRated door assemblyFire code officialRolling fire door
Cold room or busy traffic laneHigh-speed doorControls and wiringHigh-speed door

Which commercial door fits the opening?

The right door depends on the opening size, how often it cycles, the space above and beside the opening, insulation needs, security, and the design wind pressure at the building. Sectional doors and rolling doors are the two most common choices for bay doors. The company that takes the job specifies the door, and you can ask it to explain the trade-offs.

NeedDoor types commonly consideredTrade-off to ask about
Loading dock door with frequent useSectional or rollingCycle life of the springs, and seal at the trailer
Fleet or shop baySectional, often insulatedHeadroom, insulation, windows
Tight headroom or securityRolling steelCoil space above the opening
Self-storage unitsRolling sheet doorsSize and number of units
Cold room or busy interior laneHigh-speedControls, sensors and insulation
Fire wallRated rolling fire doorLabel, testing and records

For more on the differences, see our research on rolling steel vs. sectional doors and commercial garage door insulation. Industry specifications include ANSI/DASMA 102-2018 for sectional overhead doors and ANSI/DASMA 203-2020 for non-fire-rated rolling doors (DASMA standards).

Nameplates you might see on commercial doors include Overhead Door and Raynor, both of which make commercial sectional and rolling doors. Overhead Door also lists a line of wind-load doors. These are just examples of manufacturers. Listing them doesn't mean any affiliation.

Why does wind rating matter for a new door in Mobile, AL?

Mobile's building codes set high design wind speeds. A new commercial door has to be built for the wind pressure at the building where it's installed, so the door's rating matters as much as its size. Which rules apply depends on whether the site is in the City of Mobile, another city, or unincorporated Mobile County.

Where the building isDesign wind speed by risk categorySource
City of MobileRisk Category I: 145 mph. II: 159 mph. III: 169 mph. IV: 179 mph.City 2021 IBC local amendment
Unincorporated Mobile CountyRisk Category I: 148 mph. II: 160 mph. III and IV: 174 mph.County code adoption, effective July 1, 2026
Saraland, Semmes and other citiesAsk that city's officeSaraland; Semmes

Risk category depends on how the building is used. The designer and the permit office confirm it for your building.

Mobile County's code also defines a wind-borne debris region where "the ultimate design wind speed, V ult, is 130 mph (63 m/s) or greater." It says "replacement windows and door glazing shall be provided protection from wind borne debris as prescribed in… IBC 1609.2 for commercial structures" (County code adoption). If the new door has windows, ask how they meet that rule.

What to ask:

  • "What design wind pressure is this door rated for?"
  • "Does that match this building?"
  • "Can we see the label or the test papers?"
  • "Do the windows in the door need impact protection here?"

Our research on commercial garage door wind load requirements explains how design pressure works. DASMA publishes wind load guides in its TDS 155 series (DASMA technical data sheets).

What should a replacement proposal cover?

A good proposal says exactly what you're getting and who does what. Use this as a checklist for comparing quotes. It isn't homework before you call.

ItemWhy it mattersWho confirms
Opening width and heightThe door has to fitThe company that measures
Headroom and side roomDecides sectional vs. rolling, and the track typeThe company that measures
Door model and typeSo you can compare quotesThe company
Wind design pressure and labelMust suit the buildingThe company and the permit office
InsulationEnergy use and comfortYou and the company
Spring cycle lifeBusy doors need longer-life springsThe company
Opener type and duty ratingMust suit how often the door runsThe company
Photo-eyes and safety edgesRequired entrapment protectionThe company
Power and wiringMay need a licensed electricianThe company and the permit office
PermitWho applies, and which officeThe company and the permit office
Removal and disposal of the old doorOften a separate line itemThe company
Lead timeCustom and wind-rated doors can take longerThe company
Warranty and work termsSet by the company, not by UptimeThe company

Who handles permits for a new door in Mobile, AL?

We could not find a published City or County rule that says exactly when a commercial door replacement or a new opener needs a permit. Ask the company doing the work, and check with the office that covers the address. We checked these sources on September 23, 2026.

Office or ruleWhat the source saysQuestion to ask
City of MobileBuild Mobile handles permits and lists the 2021 building codes and 2020 electrical code (permitting; adopted codes; permits 251-208-7602)"Does this door replacement or new opener need a permit?"
Unincorporated Mobile CountyInspection Services says "almost any work done in Mobile County, whether residential or commercial, requires a permit." The 2024 codes and 2023 electrical code took effect July 1, 2026. (permits; code adoption; 251-574-3507)"What permit does this replacement need?"
SaralandIts own building department issues building and electrical permits (Saraland; 251-679-5502)"Which Saraland permits apply?"
SemmesLists the 2018 building code and 2020 electrical code. Commercial building permits "will only be issued to a state licensed general contractor with a City of Semmes Business License." It also says commercial plans, "including additions, must be designed, and stamped by an Alabama Licensed Engineer." (Semmes; 251-649-5752)"Does this job need a Semmes permit or stamped plans?"
State licenseA general contractor license applies when "the cost of the undertaking is one hundred thousand dollars ($100,000) or more." The board lists "Specialty Door and Hardware" as a classification. (Ala. Code §34-8-1; 230-X-1-.27; license search)"Is this project $100,000 or more? Which license and classification cover it?"
ElectricalAlabama licenses "electrical power or control systems" work and exempts "systems that operate on 25 volts or less" (§34-36-3; §34-36-13)"Who wires the new opener, and what license do they hold?"
City business licenseThe City of Mobile requires a business license "for any person, firm or entity conducting business from, into or within the City of Mobile and the Police Jurisdiction" (City business license)"Do you hold a current City of Mobile business license?"

A permit office's general fee schedule is not a door price. Ask the company whether permit fees are in the quote.

Can a storm- or impact-damaged door be repaired instead?

Sometimes. It depends on how much of the door is damaged and whether parts are still made. A few bent panels or slats may be a repair. A door blown out of its tracks or guides, with a bent track and hood, may be a replacement. If the building is open to rain or theft, say so first on the call. See our research on commercial garage door repair vs. replace.

What should you say when you call?

Say where the facility is, which opening it is, what kind of door is there now, and why it's being replaced. You don't need measurements to start.

  1. Call (385) 325-7138 and describe the project.
  2. Your request may be shared. If an independent commercial dock-and-door repair company receives it, that company decides whether it can take the job.
  3. That company confirms the details. Measurements, door choice, price, scheduling, permits, and its own warranty and work terms are set with them.

Example of what to say: "We need to replace a damaged 12-foot dock door at our warehouse in Mobile, AL, and I can give you the address."

If you reach voicemail, leave the facility address, the door or dock number if known, what's wrong, and a callback number.

Read more about how service requests work and who Uptime is.

Call about a new or replacement door.

Call(385) 325-7138

What affects commercial garage door installation cost?

We can't quote a new door from a web page. The price depends on the size, the door type and rating, the opener, and the site. Here's what to ask before you authorize work.

Commercial door installation is priced by the company doing the work after it measures the opening. The main cost drivers are the door's size and construction, its wind rating, insulation, the opener and wiring, removal of the old door, and lead time.

Cost driverWhat changes the priceWhat to ask
SizeBigger doors cost more"What size did you measure?"
Door type and gaugeSectional vs. rolling, steel thickness"Why this door type and gauge?"
Wind ratingHigher design pressure can mean a heavier door"What wind rating is quoted?"
InsulationInsulated doors cost more"Is the door insulated? To what level?"
Opener and controlsOpener type and duty rating"Which opener, and why?"
Electrical workNew circuits or rewiring"Is electrical work in the quote?"
Removal and disposalTaking out the old door"Is removal included?"
Jamb or header workOpening repairs (structural work is separate)"Does the opening need any work? Who does it?"
PermitApplication and fees"Are permit fees included?"
Lead timeCustom and wind-rated doors"When can the door arrive?"

For national cost context, see our research on commercial garage door cost.

Ask these questions on the call.

Call(385) 325-7138

What does an installation request cover, and what doesn't it?

This page covers new and replacement building-mounted commercial sectional, rolling and high-speed doors and their openers at commercial sites in Mobile County. The company that takes the job confirms the exact scope.

Not covered: home garage doors, boat docks, trailer doors, storefront and glass doors, hollow-metal walk-through doors and their hardware, parts-only orders, and structural concrete, new wall openings or slab work.

Where in the Mobile area?

Call about new and replacement commercial doors at facilities across Mobile County, including Mobile, Prichard, Saraland, Semmes, Theodore, Tillmans Corner and Grand Bay. Baldwin County and Pascagoula-area sites are reviewed case by case. See the Mobile, AL service area or go back to loading dock and dock door repair in Mobile, AL.

Commercial door installation questions

Does replacing a commercial garage door need a permit in Mobile?

It depends on the job and the office that covers the address. The City of Mobile, Mobile County, Saraland and Semmes each run their own permit offices. Ask the company and that office.

How do I choose between a sectional and a roll-up door?

It depends on headroom, how often the door runs, insulation and security. The company that measures the opening can explain the trade-offs. See rolling steel vs. sectional doors.

Can we keep the old opener?

Maybe. It has to fit the new door and provide working entrapment protection under UL 325. The company decides whether it's compatible.

What affects lead time?

Door size, wind rating, insulation, color and how busy the maker is. Ask for a delivery estimate in writing.

Sources

Checked September 23, 2026:

For a national overview, see commercial overhead door repair.

Call about the new door

Tell us the address and which opening needs a door.

Call(385) 325-7138

Independent service-request website. Calls may be shared with an independent commercial dock-and-door repair company. That provider confirms availability, scope, pricing, and service terms.

Related pages: overhead door repair · roll-up door repair · high-speed doors · fire doors · Change service area

Call(385) 325-7138