Rolling Fire Door Repair, Inspection & Testing in Atlanta, GA
For rolling fire door repair in Atlanta, GA, call (385) 325-7138 about a fire-rated door that has dropped, a door that will not reset, damage to a rated assembly, or a question about inspection and testing.
Call to describe the problem—if the door is stuck open or the dock is down, say so first.
Independent service-request website. Calls may be shared with an independent commercial dock-and-door repair company. That provider confirms availability, scope, pricing, and service terms.
Fire-rated rolling doors and shutters in commercial buildings across metro Atlanta.
Facts checked: September 18, 2026.
Is your door fire-rated? Here's how to tell.
A rolling fire door is a rated opening protective. It looks like an ordinary rolling steel door most of the time, and it is designed to close by itself when a fire is detected, protecting an opening in a fire-rated wall.
Manufacturers such as Cookson and Overhead Door offer fire-rated rolling assemblies. The actual assembly label and records matter; the brand name by itself does not prove a rating. Share information already known or safely available, not a close inspection of a failed door.
Use existing records or information already visible from a safe location. Do not approach a released or damaged door to inspect these items:
| What to look for | What it suggests | What it does not prove | Who confirms |
|---|---|---|---|
| A label on the door, the guide or the bracket | Rated assembly | That the rating still holds today | The provider and the fire code official |
| A release mechanism — often a fusible link, a small metal link in the release chain designed to melt at a set temperature and let the door drop | Automatic-closing design | That the release still works | Same |
| A governor controlling descent speed | Built for controlled closing | Anything about its current condition | Same |
| Its position in a wall separating two parts of the building | It may be protecting a rated opening | Which wall is actually rated | Same |
| A line in the building's fire protection records | It is being tracked | That testing is current | Same |
If you are not sure, say so on the call. Do not test it to find out.
My fire door dropped. What do I do?
A fire-rated rolling door may have closed in response to an alarm or heat, or there may be a fault. If there is an active fire or alarm, follow the facility’s emergency plan and contact emergency services rather than treating this repair line as the emergency response.
Do not reset it yourself. Resetting a released fire door is not general maintenance. It involves the release mechanism and the door's rated condition, and getting it wrong leaves you with a rated opening that looks fine and is not.
What to do instead: keep people clear, don't force it, follow your facility's process for the affected area, and call. Tell whoever takes the call whether it dropped on an alarm or came down on its own — that distinction matters to the person who comes out, so the provider can investigate the release without assuming its cause.
DASMA's guidance for this equipment is explicit: drop tests, resets, repairs and maintenance should be performed by a trained door systems technician with complete knowledge of this type of fire door and the manufacturer's instructions, and repair parts must be obtained from the original door manufacturer. (DASMA TDS 271)
Call and describe what happened.
What the rules actually are in Georgia
Georgia sets statewide minimum fire-safety standards. The building’s fire authority applies those standards to the opening and the proposed work.
Georgia's fire safety standards apply statewide without local adoption. Rules adopted by the Safety Fire Commissioner "shall have the force and effect of law and shall have statewide application as being the state minimum fire safety standards and shall not require adoption by a municipality or county." (Ga. Comp. R. & Regs. 120-3-3-.02)
That statewide minimum applies in Fairburn, Marietta and unincorporated Henry County. The responsible fire official, permit process and building-specific decisions still depend on the address and scope.
Georgia adopts the 2024 International Fire Code as its State Minimum Fire Prevention Code. (Ga. Comp. R. & Regs. 120-3-3-.04)
Georgia’s reference list includes NFPA 80, 2022 edition — Standard for Fire Doors and Other Opening Protectives. It appears at 120-3-3-.04(58), without modifications in that list. Ask the fire authority which inspection, testing and documentation requirements apply to this opening and the proposed repair. (Georgia fire standards)
The inspection and testing interval matters even when the door is rarely used. DASMA’s rolling-fire-door guidance describes NFPA 80 inspection and drop-testing at least annually, including doors that stay closed or are not regularly operated. Ask for the applicable inspection and test record, not just a general maintenance invoice.
What DASMA's guidance says. DASMA — the Door and Access Systems Manufacturers Association — publishes technical guidance for this exact equipment:
Ask the provider’s scope to identify inspection, correction of deficiencies, qualified drop-testing and the resulting record. TDS 271 calls for trained personnel familiar with that door and the manufacturer’s instructions, and original-manufacturer repair parts. These are technician activities, not steps for the caller to perform.
Settle the authorization question before the visit: what is included in the inspection/test price, what happens if a defect is found, and who approves separately priced repairs? The test fee is not automatically an agreement to perform every repair.
One more operator detail worth raising. UL 325, the operator safety standard, states in its own scope that it does not address active fire alarm functionality — that is addressed in NFPA 80. (UL 325 scope) That is a clean way to see why a fire door is a different conversation from an ordinary powered door, even when both roll up.
And if the opening itself is changing: Georgia’s added IFC section 504.1.1, “Access Doors,” has a 100-linear-foot-or-major-fraction baseline for the specified exterior walls of Group F, S and warehouse-store Group M buildings facing required fire apparatus access roads. Continuous rolling-dock-door walls have a 200-linear-foot-or-fraction interval. The rule also has size, sprinkler and fire-official approval provisions; see the full local explanation before replacing or blanking off an affected opening. (Georgia fire standards)
None of this determines what applies to your building. The provider and the issuing office confirm that.
Who is allowed to work on a fire door in Georgia?
Georgia's State Licensing Board for Residential and General Contractors lists Sliding & Coiling Doors and Overhead Doors among its Traditional Specialty Contractors, so work inside a listed specialty does not require the residential or general contractor license. The same page states a specialty contractor still cannot do work under Chapter 14 of Title 43 without being licensed for it. (Georgia SOS, checked Sep 18, 2026)
On top of that, this equipment carries its own competence expectation: DASMA's guidance says drop tests, resets and repairs should be done by a trained door systems technician who knows this type of door and the manufacturer's instructions. A general contractor license does not make somebody that person, and the absence of one does not disqualify them either.
Ask directly: who is doing the drop test, what training do they have on this type of door, and where are the parts coming from. Verify any license at the Georgia licensee search.
What we cover on fire doors — and what we don't
Covered. Fire-rated rolling doors and fire shutters; curtains, slats, guides and brackets; release mechanisms, fusible links and governors; hoods and barrels; inspection, drop testing and corrective repair inquiries; rated-assembly replacement inquiries.
Not covered. Fire alarm systems and their detection devices. Sprinkler systems. Swinging fire-rated pedestrian doors and their hardware. Residential. Parts-only orders.
Boat docks and lifts, truck and trailer cargo doors, pedestrian storefront or automatic-entry doors and their locks and closers, and structural concrete, pit and slab work are outside this service too.
If your door is a fire-rated rolling door or shutter, call.
What happens when you call (385) 325-7138?
- You describe the door. Facility address, which opening, whether it dropped or was found down, and whether the alarm activated.
- The call may be shared with an independent commercial dock-and-door repair company. Describe the equipment and the facility address so the company can confirm the request fits its scope.
- That provider confirms the work and terms. The company confirms the facility address, scope, availability, price, schedule and its own contract, work and warranty terms before you authorize work.
Example wording — not a script:
"The fire door over the opening between our warehouse and production dropped this morning at our Marietta plant. I don't know if the alarm went off. I can give you the address."
If you reach voicemail, leave the facility address, the door or dock number if known, what's wrong, and a callback number.
What should I have ready?
Which opening, and whether it dropped or was found down. That starts it.
If you already know it: whether the alarm activated, what the label says if it is readable from a safe distance, roughly how wide and tall the opening is, and when it was last inspected or tested.
You can call without a model, a photo or a test result. Never trigger, reset or test a fire door to gather information for a phone call.
What drives the price on fire door work?
We can't quote your exact fire door work from a web page. The price depends on the assembly, the fault, parts, and access. Here's what to ask before you authorize work.
What moves the number:
- Inspection, testing and corrective repair are separate activities. A drop test is not the same line item as fixing what the drop test finds.
- The repair must preserve the listed assembly. DASMA’s guidance calls for repair parts from the original door manufacturer; this is not a claim that every individual component has its own fire rating.
- Release and governor work. Specialist components with specialist labour.
- Curtain and guide damage on top of the rated release work.
- Documentation. Ask what record you get and what it covers.
- Access and height. Fire doors are often in awkward positions over busy openings.
- Parts lead time on the specific assembly; ask what is available before agreeing to a date.
- Diagnostic and travel charges.
Ask before you authorize, and add one question you would not ask on a normal door:
- Is this visit inspection, testing, repair, or some combination — and what is each one priced at?
- Who is performing the drop test, and what training do they have on this door type?
- Where are the replacement parts coming from?
- Will this repair keep the assembly's rating, and what documentation will I receive?
- What happens, and what does it cost, if a component fails during the test itself?
Call to talk through the scope.
Can the rated assembly be repaired, or must it be replaced?
The answer turns on the damage, manufacturer-supported parts and whether the assembly can retain its required function and listing after the work. A failed inspection is a reason to identify and correct the defect, not automatic proof that the entire door must be replaced.
Ask the provider to separate corrective repair from complete replacement, and specify the inspection/test record after the work. A replacement must meet the required opening protection; an ordinary rolling steel door is not a substitute for a required fire-rated assembly. DASMA’s guidance puts final acceptance with the authority having jurisdiction.
Where we take fire door calls in Atlanta
Commercial buildings across the 29-county Atlanta metro. The independent provider confirms the facility address and whether it can take the job. The applicable fire authority confirms building-specific approvals.
For Atlanta city buildings, start with the Office of Buildings for construction-permit routing and ask which fire authority must review a change to this opening. Elsewhere, use the actual city or county office rather than the postal city alone.
Full service area · Marietta and Cobb County · McDonough and Henry County
Rolling fire door questions
Can I reset it myself?
No. Resetting a released fire door is not general maintenance — it involves the release mechanism and the door's rated condition. DASMA's guidance is that resets are performed by a trained door systems technician who knows this door type and the manufacturer's instructions.
How often does a rolling fire door need testing?
DASMA TDS 271 describes NFPA 80 inspection and drop-testing at least annually, including doors that remain closed or are rarely used. Georgia’s fire-standard list references NFPA 80, 2022 edition. Confirm the applicable requirement and documentation with the provider and the building’s fire authority.
Is a fire door the same as a regular rolling steel door?
No. It looks similar, but it is a rated opening protective with a release mechanism, a governed descent and testing and documentation obligations attached to it. An ordinary non-rated rolling door does not provide the required fire-rated opening protection.
Does the rule change depending on which city I'm in?
Georgia’s minimum fire-safety standards apply statewide without municipal or county adoption. The responsible fire official and the requirements for a particular building or alteration still need to be confirmed locally.
Get the rated opening sorted
Call (385) 325-7138 and describe the door. If it has dropped, say so first, and leave it where it is.
Independent service-request website. Calls may be shared with an independent commercial dock-and-door repair company. That provider confirms availability, scope, pricing, and service terms.
Atlanta dock and door repair home · All Atlanta services · Atlanta service area · Atlanta phone page · Change service area
About Uptime · How service requests work
Sources
All checked September 18, 2026.
- Ga. Comp. R. & Regs. 120-3-3, State Minimum Fire Safety Standards — statewide application, 2024 IFC adoption, Georgia amendment 504.1.1
- DASMA TDS 271, Rolling Steel Fire Doors: Periodic Inspection and Drop-Testing
- DASMA TDS 269, Rolling Door Performance Evaluation · DASMA technical data sheet library
- UL 325 scope, UL Standards
- Georgia SOS — Traditional Specialty Contractors Policy Statements · Georgia licensee search
- Uptime national rolling steel door repair